
Fire Alarm Systems in Beverley
Design, installation, maintenance and compliance to BS 5839 and BAFE SP203-1.
Established in Hull in 1992 — Fire & Security Systems Across Yorkshire, Lincolnshire & the Humber
Fire and security for Beverley's historic high street, schools and East Riding commercial premises.

In short
SPS Technical is a commercial fire and security contractor working across Beverley and the wider East Yorkshire & the Humber area. We design, install, service and maintain fire alarm systems, CCTV, intruder alarms and access control for commercial, industrial and public sector premises. Planned maintenance is scheduled to the standards that apply to each system — normally six-monthly for fire alarms and annually for CCTV, intruder and access control — and every visit produces documentation for your records.
Beverley mixes a compact historic centre with modern commercial and education premises around its edge, and fire and security systems have to fit both. In older buildings, detection is specified around the structure as much as the occupancy: cabling routes, cable containment and device positions are planned to avoid unnecessary impact on the fabric of the building, and the system is designed so future alterations do not mean starting again.
Outside the centre, the town's schools, colleges, health premises and business parks carry the same obligations as anywhere else under the Regulatory Reform (Fire Safety) Order, with a responsible person who needs a system that can be tested, maintained and evidenced. We work from our Hull head office, which is a short run up the A1079, and cover Beverley and the surrounding villages on scheduled rounds rather than through subcontracted third parties.
Local engineers
We are a regional company, so Beverley is looked after by local engineers from our team based across Yorkshire, Lincolnshire and the Humber, not sent in from the other end of the country.
We know the buildings, estates and fire service rules in and around Beverley, which means better system design and fewer surprises at handover.
A regional team you get to know, with one point of contact for installation, maintenance and faults.
Indicative coverage from our engineering base. Contact us to confirm service availability for your specific site.
Local capability
Beverley is covered from our Hull head office on scheduled rounds, with reactive attendance arranged under the same service agreement.
Fire detection in the town centre is specified around existing construction, with cable routes and device positions planned to limit alteration of the building fabric.
We maintain life-safety and security systems for education and public buildings where documented testing and out-of-hours access control are both required.
Intruder alarms, CCTV and fire detection installed around trading hours for shops, banks, cafes and hotels in and around the centre.
Fire alarm, CCTV, intruder and access control delivered under one maintenance agreement, with a shared record set and one escalation route.
Available in Beverley

Design, installation, maintenance and compliance to BS 5839 and BAFE SP203-1.

Installation, maintenance, health monitoring and integration for commercial CCTV.

Graded installation, maintenance and monitoring to EN50131 and SSAIB.

Paxton installation, maintenance, upgrades and integration across system types.

24/7 alarm monitoring, keyholding and response through the ARC.
Learn more
Remote CCTV monitoring, video verification and incident escalation.
Learn more
Planned maintenance, reactive repairs and compliance certification.
Learn more
Audit, take over and maintain systems installed by any provider.
Learn moreHow we work
One accountable team for the whole lifecycle of your fire and security systems.
We visit your Beverley premises, review any existing systems and talk through risks, layout and how the building is used.
A system designed to the relevant British and European standards, with a clear written proposal and no surprises.
Our engineers install, test and commission the system, then hand over certification and user training.
Planned maintenance, reactive repairs and monitoring options keep the system compliant and working year after year.
Capability in Beverley
Commercial fire alarm systems in Beverley are designed, installed and maintained to BS 5839-1 under our BAFE SP203-1 certification. In the town centre this usually means addressable detection specified around older construction, with cabling planned to limit alteration of the building; in schools and out-of-town premises it means conventional or addressable systems designed around occupancy patterns and evacuation strategy.
Every system starts with a survey and a category assessment based on how the building is used, occupied and evacuated. We then provide design, installation, commissioning and certification, followed by planned maintenance visits and a documented certificate at each one.
For premises where an existing system was installed by another provider, we audit the installation, record the current condition and take over maintenance where the system is serviceable.
Capability in Beverley
CCTV for Beverley premises is specified around what you need to see and prove, not the number of cameras. For high-street retail and hospitality premises this often means coverage of entrances, tills and stock areas with retention set to what the business actually needs, rather than the longest period the recorder will allow.
We design camera coverage, recording capacity and retention against BS EN 62676 and UK GDPR expectations, so footage is available when it is needed for an incident, insurance claim or investigation and retained no longer than it should be.
Systems are installed and configured with remote health monitoring, and existing installations from other providers can be taken over, audited and brought back to a maintainable condition.
Capability in Beverley
Intruder alarms and access control in Beverley are installed to EN 50131 at a grade and level that suits the premises, with SSAIB certification covering intruder, CCTV and access control work. For shops, offices and schools in and around the town, this typically means intruder protection on entry points and secure areas, with access control on staff and service doors.
Where police response is wanted, the alarm must be installed and maintained by a registered company to the relevant grade, and confirmed alarm signalling needs to be configured correctly. We install and maintain systems that meet those requirements and explain what they mean for your site.
Access control is typically delivered on Paxton as a Gold Installer, covering door control, time-based access, visitor management and integration with door entry or fire alarm interfaces.
Why choose us
One accountable partner across fire, CCTV, intruder and access control — from design and installation through to maintenance, monitoring and compliance. Local engineering, single-provider delivery and a compliance-led approach.
Beverley sits eight miles from our Hull head office, so engineers and parts reach the town quickly, and scheduled maintenance visits are planned around the same team that would attend a fault.
Work in the town centre is planned around the constraints of older construction, with detection and cable routes specified to minimise alteration of the building while still meeting the category the premises require.
We specify and maintain systems for schools, colleges and public buildings where life safety, safeguarding, out-of-hours access and auditable compliance records all apply at once.
Shops, banks, cafes and hotels in the centre need intruder protection, CCTV and fire detection that will not disrupt trading, so installation is programmed around opening hours.
Fire alarm, CCTV, intruder and access control are designed, installed, maintained and monitored by one SPS Technical team, with a single set of records and one point of responsibility.
SSAIB certified for security systems and BAFE SP203-1 certified for fire alarm design, installation, commissioning and maintenance, with ISO 9001 and ISO 14001 certification.
Sectors supported
Schools, colleges and universities — life-safety, access control and monitoring aligned to safeguarding.
Council and public-sector buildings with accredited, auditable compliance.
Offices and commercial property with integrated fire, CCTV and access control.
Shops, shopping centres and mixed-use sites with CCTV, intruder and access control.
Free Compliance Tools
Practical tools to help Beverley organisations review their existing fire and security arrangements.
Areas covered
Our engineers cover the surrounding area through scheduled service visits. Where a dedicated page exists, follow the link for local detail.
FAQs
Keep exploring
Talk to SPS Technical about a new installation, system takeover, planned maintenance or monitoring for your Beverley site.
Regional coverage
Beverley forms part of our wider East Yorkshire & the Humber fire and security engineering coverage.
Accreditations
Independently certified, working to British Standards. Check every accreditation on the official register.
Registration HUMB018 · Schedule 10549-P
UKAS accredited for intruder alarms to PD 6662 and fire alarm systems to BAFE SP203-1. Also SSAIB certificated (outside UKAS scope) for CCTV to SS2003 and access control to SS2002
Check on SSAIB register (search HUMB018)Certificate 104302 · Organisation ID 303286
Fire alarm design, installation, commissioning and maintenance to BS 5839-1
View our entry on the BAFE register1208-QMS-001 · 1208-EMS-001
Quality and environmental management, certified by Alcumus ISOQAR. ISO 9001 held since 1997
Check with ISOQAR (enter 1208)CHAS-0004703 · Constructionline 92018 · SafeContractor PE5040
SSIP health and safety approval, procurement registration and Paxton Gold Installer status
Check CHAS and SafeContractor on the SSIP portalFor intruder alarms, SPS Technical is an approved installer of police-response systems with the following forces, so your intruder alarm can be issued a police Unique Reference Number (URN) under the NPCC Police Requirements for Security Systems.
Police approval applies to intruder alarms only.
Since 1992
Established in Hull
1,750+
Systems maintained
2,850+
Scheduled service visits a year
4
Regional offices: Hull, Grimsby, Lincoln, Sheffield
Trusted across universities, NHS and healthcare, local authorities, schools and academy trusts, logistics and industrial sites, transport, and stadiums and venues.
Reviewed by the SPS Technical team · Last updated October 2026
Full accreditation details